Search This Blog

Tuesday, June 27, 2017

PowerShell command - GetWmiObject


> To get the remote computer name from IP Address:
Get-WmiObject Win32_ComputerSystem -ComputerName remotecomputerIPaddress | Select Name
> To get the computer description from a machine remotely:
Get-WmiObject Win32_OperatingSystem -ComputerName remotecomputernameorIPaddress | Select Description
> To get the currently logged on user from a machine remotely:
Get-WmiObject Win32_ComputerSystem -ComputerName remotecomputernameorIPaddress | Select UserName

Monday, June 26, 2017

Blue Screen after modifying Windows registry - Recovery

Description
You changed certain value on your Windows machine's registry (HKLM). After a restart, the machine cannot start properly again. Windows never reached the normal logon page.
You want to revert the changes back to previous condition.


Resolution
Use a CD/DVD/ISO to boot to the Recovery Environment. Follow the wizard until you can open the command prompt. At the command prompt, type regedit.
In the registry editor, highlight HKEY_LOCAL_MACHINE, and then go to File and select Load Hive. Select the file from other drives. It could be in E:\(or F:\)Windows\System32\Config, and will be called just SOFTWARE or SYSTEM. Type any name when the wizard prompt for the hive name.
Go to the registry location where you performed the last changes. Revert the value back to previous working condition.
To unload  the Hive, Highlight that hive name under HKEY_LOCAL_MACHINE, and go to File and select Unload Hive.
Restart the machine normally.




 

Repadmin Error 1722

Description
You are doing daily check of Active Directory replication on your Admin's machine using repadmin /replsum command.
You saw there are error 1722 at the bottom of the result.
You have checked that all the necessary port for Active Directory are open. You also verify using PortQry tool.
You try to perform WMI query from Admin's machine to the suspected DC but failed.
You logon to the suspected DC and all incoming replication are ok.


Resolution
Run the WMI query and monitor the network. Most probably there are some RPC traffic being dropped somewhere in the network. On Windows 2008 and above, please check for traffic running on RPC dynamic port (49152 - 65535).

Sunday, August 2, 2015

Cannot Install Windows 2008 R2 Service Pack 1

Description

You are experiencing an error or problem when installing Windows 2008 R2 Service Pack 1. It says "Installation was not successful", error code 0x800f0826.

 
You have followed  the steps in https://support.microsoft.com/en-us/kb/2575082.
SYSTEM and Administrators already have Full Permission on usbstor.inf and usbstor.pnf files.
You have also follow http://windows.microsoft.com/en-ID/windows7/troubleshoot-problems-installing-service-pack to download and run the latest System Update Readiness Tool.
Other than those, you have also try to run sfc /scannow command but no error found.

At c:/windows/inf/Setupapi.dev.log you found a couple of errors similar to:
inf:      Opened INF: 'C:\WINDOWS\System32\DriverStore\FileRepository\compositebus.inf_amd64_neutral_b9280780a8000d4b\compositebus.inf' ([strings])
sto:      {Update Device: ROOT\COMPOSITEBUS\0000}
sto:           Updating installed driver version:
sto:                Driver Version Last     = 6/21/2006,6.1.7600.16385
sto:                Driver Version New      = 6/21/2006,6.1.7601.17514
!!!  sto:           Failed to update driver date. Error = 0x00000005
sto:      {Update Device: exit(0x00000005)}
sto: {Update Device Drivers: exit(0x00000005)} 12:07:37.106
!!!  sto: Failed to update devices for all driver updates. Error = 0x00000005


  inf:      Opened INF: 'C:\Windows\System32\DriverStore\FileRepository\umbus.inf_amd64_neutral_2d4257afa2e35253\umbus.inf' ([strings])
     sto:      {Update Device: ROOT\UMBUS\0000}
     sto:           Updating installed driver version:
     sto:                Driver Version Last     = 6/21/2006,6.1.7600.16385
     sto:                Driver Version New      = 6/21/2006,6.1.7601.17514
!!!  sto:           Failed to update driver date. Error = 0x00000005


Resolution

There's a missing permission on the registry that related to the drivers.

1. Download psexec.exe (http://technet.microsoft.com/en-us/sysinternals/bb897553)
2. Execute the following command from an elevated command prompt – ‘psexec /i /s cmd’
3. When a new command prompt opens execute regedit
4. Navigate to HKLM\SYSTEM\CURRENTCONTROLSET\ENUM\ROOT\COMPOSITEBUS\0000\PROPERTIES\
5. Verify that ‘System’ has ‘full control’ of each subkey. If not force inheritance from the ‘PROPERTIES’ key.
6. Test the install of SP1.


 

Monday, August 5, 2013

Group Policy are not applying properly - event id 1054

Description:

You have a group policy setting that you want to deploy during computer startup. However it seems that the policy is not applying properly. Running gpresult command from the client machine shows no error. Running gpresult wizard from GPMC for the problematic machine shows GPO Core processing error preventing some policies from applying successfully. Running gpupdate /force will correct the situation and the settings will be applied successfully. 
At event viewer of the problematic computer, you found event id 1054, “Windows cannot obtain the domain controller name for the computer network. (The specified domain either does not exist or exist or could not be contacted). Group Policy processing aborted.”

Resolutions:

Please follow Microsoft's Knowledge Base Article KB840669 http://support.microsoft.com/kb/840669

As Per KB 840669, create a new DWord value on registry on:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon
Name: GpNetworkStartTimeoutPolicyValue
Value: 120

Restart the client computer. Settings can be applied successfully.

Search Google