How to use the O2 Personal Digital Assistant keyboard

To be able to use this keyboard, please follow these steps:

1. Make sure the keyboard turn on. To make sure, slide the on/off switch on the left side. Try to press some buttons, if the keyboard light up it means the keyboard is active.
2. Uncheck the “Beam” settings on Start > Settings > Connections > Beam
3. Install the O2 keyboard software from the Accompanying CD to the PDA.
4. After the software installed on O2 PDA, click Start > Program > O2 Keyboard
5. Mark on “Active Keyboard”.
6. Pull the Infra Red antenna from the keyboard and direct it to the O2 Infra Red Port.